Linux version 2.6.1-exp (venza@tabr) (gcc version 3.3.2 (Debian)) #13 Sat Jan 17 17:25:26 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001bfea000 (usable) BIOS-e820: 000000001bfea000 - 000000001bfef000 (ACPI data) BIOS-e820: 000000001bfef000 - 000000001bfff000 (reserved) BIOS-e820: 000000001bfff000 - 000000001c000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 447MB LOWMEM available. On node 0 totalpages: 114666 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 110570 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f6e30 ACPI: RSDT (v001 ASUS L3000D 0x42302e31 MSFT 0x31313031) @ 0x1bfea000 ACPI: FADT (v001 ASUS L3000D 0x42302e31 MSFT 0x31313031) @ 0x1bfea080 ACPI: BOOT (v001 ASUS L3000D 0x42302e31 MSFT 0x31313031) @ 0x1bfea040 ACPI: DSDT (v001 ASUS L3000D 0x00001000 MSFT 0x0100000e) @ 0x00000000 Building zonelist for node : 0 Kernel command line: root=/dev/hda3 Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1674.442 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Memory: 450244k/458664k available (1935k kernel code, 7628k reserved, 789k data, 144k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3309.56 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD mobile AMD Athlon(tm) XP-M 2000+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1673.0401 MHz. ..... host bus clock speed is 267.0744 MHz. NET: Registered protocol family 16 spurious 8259A interrupt: IRQ7. PCI: PCI BIOS revision 2.10 entry at 0xf1050, last bus=1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20031203 tbget-0291: *** Info: Table [DSDT] replaced by host OS tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:.................................................................................................................................................................................................... Table [DSDT](id F004) - 560 Objects with 54 Devices 196 Methods 22 Regions ACPI Namespace successfully loaded at root c03e3efc ACPI: IRQ9 SCI: Level Trigger. evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0747 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 000000000000E420 on int 9 evgpeblk-0747 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE] 2 regs at 000000000000E430 on int 9 Completing Region/Field/Buffer/Package initialization:..................................................................... Initialized 22/22 Regions 0/0 Fields 21/21 Buffers 26/26 Packages (568 nodes) Executing all Device _STA and_INI methods:........................................................ 56 Devices found containing: 56 _STA, 2 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 11 14 15) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) Uncovering SIS962 that hid as a SIS503 (compatible=0) Enabling SiS 96x SMBus. ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: Power Resource [FN0] (on) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf10 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbf40, dseg 0xf0000 pnp: 00:11: ioport range 0x290-0x297 has been reserved pnp: 00:11: ioport range 0x3f0-0x3f1 has been reserved pnp: 00:11: ioport range 0xe400-0xe47f has been reserved pnp: 00:11: ioport range 0xec00-0xec3f has been reserved PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver Linux Kernel Card Services options: [pci] [cardbus] [pm] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Machine check exception polling timer started. powernow: AMD K7 CPU detected. powernow: PowerNOW! Technology present. Can scale: frequency and voltage. powernow: Found PSB header at c00f0320 powernow: Table version: 0x12 powernow: Flags: 0x0 (Mobile voltage regulator) powernow: Settling Time: 100 microseconds. powernow: Has 1 PST tables. (Only dumping ones relevant to this CPU). powernow: PST:0 (@c00f0330) powernow: cpuid: 0x781 fsb: 133 maxFID: 0x3 startvid: 0xb powernow: FID: 0x12 (4.0x [532MHz]) VID: 0x13 (1.200V) powernow: FID: 0x4 (5.0x [665MHz]) VID: 0x13 (1.200V) powernow: FID: 0x8 (7.0x [931MHz]) VID: 0x13 (1.200V) powernow: FID: 0xc (9.0x [1197MHz]) VID: 0xe (1.300V) powernow: FID: 0x0 (11.0x [1463MHz]) VID: 0xc (1.400V) powernow: FID: 0x3 (12.5x [1662MHz]) VID: 0xb (1.450V) powernow: Minimum speed 532 MHz. Maximum speed 1662 MHz. devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Initializing Cryptographic API ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Lid Switch [LID] ACPI: Fan [FAN0] (on) ACPI: Processor [CPU0] (supports C1 C2, 8 throttling states) ACPI: Thermal Zone [THRM] (50 C) Asus Laptop ACPI Extras version 0.26 L3D model detected, supported isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found pty: 256 Unix98 ptys configured Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected SiS 740 chipset agpgart: Maximum main memory to use for agp memory: 380M agpgart: AGP aperture is 64M @ 0xe8000000 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A Using anticipatory io scheduler Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 sis900.c: v1.08.07 11/02/2003 eth0: ICS LAN PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xa000, IRQ 11, 00:0c:6e:6c:29:6e. PPP generic driver version 2.4.2 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:pio hda: IC25N040ATMR04-0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-R2312, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 78140160 sectors (40007 MB) w/1740KiB Cache, CHS=16383/255/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 mice: PS/2 mouse device common for all mice i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 Synaptics Touchpad, model: 1 Firmware: 4.6 180 degree mounted touchpad Sensor: 18 new absolute packet format Touchpad has extended capability bits -> four buttons -> multifinger detection -> palm detection input: SynPS/2 Synaptics TouchPad on isa0060/serio4 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 PM: Reading pmdisk image. PM: Resume from disk failed. ACPI: (supports S0 S1 S3 S4 S5) kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 144k freed Adding 3132632k swap on /dev/hda7. Priority:-1 extents:1 EXT3 FS on hda3, internal journal Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1654] Yenta: ISA IRQ mask 0x0498, PCI irq 5 Socket status: 30000006 Yenta: CardBus bridge found at 0000:00:0a.1 [1043:1654] Yenta: ISA IRQ mask 0x0498, PCI irq 9 Socket status: 30000006 irda_init() NET: Registered protocol family 23 EXT2-fs warning (device hda5): ext2_fill_super: mounting ext3 filesystem as ext2 EXT2-fs warning (device hda6): ext2_fill_super: mounting ext3 filesystem as ext2 NTFS driver 2.1.5 [Flags: R/O MODULE]. NTFS volume version 3.0. drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ehci_hcd 0000:00:03.3: EHCI Host Controller ehci_hcd 0000:00:03.3: irq 9, pci mem dc9b7000 ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1 PCI: cache line size of 64 is not supported by device 0000:00:03.3 ehci_hcd 0000:00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ohci_hcd: 2003 Oct 13 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ohci_hcd 0000:00:03.0: OHCI Host Controller ohci_hcd 0000:00:03.0: irq 9, pci mem dc9b9000 ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:03.1: OHCI Host Controller ohci_hcd 0000:00:03.1: irq 9, pci mem dc9bb000 ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:03.2: OHCI Host Controller ohci_hcd 0000:00:03.2: irq 9, pci mem dc9d6000 ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 3-0:1.0: new USB device on port 2, assigned address 2 eth0: Media Link On 100mbps full-duplex intel8x0: clocking to 48000 request_module: failed /sbin/modprobe -- snd-card-1. error = 256 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:03.1-2 drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver request_module: failed /sbin/modprobe -- irda0. error = 256 cs: IO port probe 0x0c00-0x0cff: excluding 0xcf8-0xcff cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x3c0-0x3df 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean. NET: Registered protocol family 10 Disabled Privacy Extensions on device c0377bc0(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present